How to build a tyre to fuel recycling plant?

With the mature development of pyrolysis technology, tire to fuel recycling business has attracted the attention of domestic and foreign customers. Next, I will share how to build a tyre to fuel recycling plant with the experience of helping many customers to build tyre to fuel recycling plant for your reference.

DOING tyre to fuel recycling plant installed in some conuntries

1. Raw material preparation

The raw material of tyre to fuel recycling plant can be waste tire, waste plastic or waste rubber. If you plan to do this business for a long time, it is suggested to find a good supplier of raw materials to ensure the normal progress of the project. In addition, the collected raw materials need to be pretreated. For example, the collected tires or plastics contain impurities such as soil, wood or moisture. These impurities need to be treated in advance to ensure that the raw materials are free of impurities and dry.

Piles of waste tires

2. Market conditions and sales channels of the final product

The main products of tyre to fuel recycling plant are generally tire oil, carbon black and steel wire, and the tire to fuel recycling project also mainly benefits from these final products. Therefore, it is necessary to investigate the market conditions and sales channels of these final products in advance.

3. Choose safe and environment-friendly tyre to fuel recycling plant

In the production process of tyre to fuel recycling plant must be safe, and various emissions can meet the national requirements. This requires the selection of safe and environmentally friendly tyre to fuel recycling plant, such as equipped with carbon black discharge device -wind conveying system and desulfurization & purification tower system.

Carbon black discharge device -wind conveying system

Desulfurization & purification tower system

4. Space required to build a tyre to fuel recycling plant

Generally speaking, the length of a set of tyre to fuel recycling plant is 25 meters and the width is 10 meters. If you use an automatic feeder, you need to increase the length by 5 meters, or 30 meters. For the convenience of installation and hoisting, the height of the plant is not less than 7 meters. In other words, a set of tyre to fuel recycling plant needs about 300 square meters. However, there is a need to place not only tyre to fuel recycling plant but also circulating pool areas, raw material storage areas and product storage areas within the plant. If the layout is reasonable, then the entire plant area may not be less than 800 square meters.

Tyre to fuel recycling plant was being installed

5. Heating fuel to be prepared

The heating fuel of the tyre to fuel recycling plant can be coal, wood, natural gas or fuel oil. After selecting the heating fuel to be used, a certain amount should be reserved for use. In addition, during the operation of the tyre to fuel recycling plant, a combustible gas is produced, which can also be used to heat the pyrolysis reactor to save fuel.

The above mentioned are the main aspects that need to be considered to build a tyre to fuel recycling plant. If you want to do tyre to fuel recycling business, you can start from these aspects. Please feel free to contact us for more information about how to build a tyre to fuel recycling plant.