Waste tyre recycling plant machinery
Waste tyre recycling plant machinery
Waste tyre recycling plant machinery raw material
Waste tyre recycling plant machinery
Working processes of waste tyre recycling plant machinery are as following:
Waste tyre recycling plant machinery
1. Make reactor rotate clockwise 0.4r/min, put waste tyre into reactor, close feeding door.
2. Burned the fuel material (coal, wood, natural gas or oil) in the furnace. Reactor will be slowly heated, when the temperature reach around 180℃, oil gas will come out, then go to cooling system and get liquid oil. Some incondensable gas which can’t cool down will be lead to furnace through a gas pipe. It will be used to heat reactor which can save your energy. Only the first 2 hours use energy for heating. After the first 2 hours mainly use gas, little energy is OK. After pyrolysis, all the oil gas come out from reactor, the temperature will fall down. Then make it rotate anticlockwise, carbon black discharging begin.
3. When the temperature deduce to 50℃, worker can opened the door of reactor take steel wire out.
4. And then you can start the next batch.
The output of waste tyre recycling plant machinery:
Main products from waste tyre recycling plant machinery
Take 10T waste tyre recycling plant machinery for example:
a. Crude oil: 45%*10t=4.5t
b. Carbon black: 30%*10t=3t
c. Steel wire: 13%*10t=1.3t
a. Crude oil: 45%*10t=4.5t
b. Carbon black: 30%*10t=3t
c. Steel wire: 13%*10t=1.3t