How to build waste to oil energy pyrolysis plant?
How to build waste to oil energy pyrolysis plant:
1. Preparation of raw material:
The raw material can be waste tire, tyre, plastic or scrap rubber. All if the above wastes can be processed by our machine. The following are details:
2. Separate the ingredient which can not be refined from waste plastic, such as: soil, wood, stone, brick etc. If the raw materials are paper mill’s waste, separate the pulp. If there is water in raw material, should dry it firstly. Methods as follows:
1. Dry in the sun: if you have enough area, you could dry the material in the sun. You should often stir it.
2. Squeeze water from material using a large power extruder.
3. Dry the material using a spin-drier.
If the raw material is waste tire and its diameter is over 1.4 meter, should cut the inner ring firstly.
Waste to oil energy pyrolysis plant workshop in Mexico(6 sets)
1. Preparation of raw material:
The raw material can be waste tire, tyre, plastic or scrap rubber. All if the above wastes can be processed by our machine. The following are details:
2. Separate the ingredient which can not be refined from waste plastic, such as: soil, wood, stone, brick etc. If the raw materials are paper mill’s waste, separate the pulp. If there is water in raw material, should dry it firstly. Methods as follows:
1. Dry in the sun: if you have enough area, you could dry the material in the sun. You should often stir it.
2. Squeeze water from material using a large power extruder.
3. Dry the material using a spin-drier.
If the raw material is waste tire and its diameter is over 1.4 meter, should cut the inner ring firstly.
Waste to oil energy pyrolysis plant workshop in Mexico(6 sets)
