Home>FAQ>Waste Tyre Recycling Pyrolysis Plant How to convert waste plastic to pyrolysis oil?

How to convert waste plastic to pyrolysis oil?

Waste Tyre Recycling Pyrolysis Plant / Chat online / Give me a price

Waste plastic

Plastic involve all aspects of our lives and bring convenience to our lives. At the same time, discarded plastic also cause great problems for our lives. How to convert these white pollutions reasonably and not re-caused pollution to our living environment is a matter worthy of study and discussion.

DoingGroup's waste plastic pyrolysis plant

DoingGroup, standing in the forefront of the development of the industry, first proposed this idea how to convert waste plastic to pyrolysis oil?? And developed a waste plastic pyrolysis plant.

Waste plastic pyrolysis plant working process

So how does the plant convert waste plastic into pyrolysis oil? It mainly uses high-temperature pyrolysis chemical reaction, in the high temperature, closed, oxygen-free environment, so that waste plastics at high temperatures, the process of cracking out fuel oil, carbon black, and combustible gases. Of course, the conversion of waste plastics into pyrolysis oil is not just so simple . Its specific process is as follows:

1. The waste plastic is sent to the reaction vessel through a auto-feeder, and is heated by using coal, wood, oil, natural gas, and so on.
2. The temperature rises to about 200 degrees and begins to crack heavy oil and gas.
3. The heavy oil and gas oil is initially filtered by the catalyst chamber, and after deceleration, it enters the condensing system and is liquefied into heavy oil and falls into the oil tank.
4. Decolorization and deodorization of the obtained heavy oil, the final result is fuel.
5. The carbon black produced during the combustion process will eventually pass through the underground sealing channel and be automatically discharged outside the furnace. Due to better sealing performance, secondary pollution to the environment is avoided.

Through this process and based on different wastes materials, their oil output is also different:

All kinds of pyrolysis plant raw materials

PE	95%
PP	90%
PS	90%
ABS	40%
Leftovers of paper	Wet 15-20%,dry 60%
House garbage	35-50%
Plastic cable	80%
Plastic bag	50%
Submarine cable	75%
Rubber cable	35%
Sole	30%
Big tires	45-50%
Small tires	35-40%
PVC	Not suitable
PET	Not suitable

These substances have a very wide range of uses in life. Their specific uses are as follows:

1. Pyrolysis oil:

Pyrolysis oil application

1).It is sold as fuel to cement plants, glass factories, ceramic factories, power plants, steel mills, boiler plants, etc.
2).For heavy oil generators.
3).The Dongying Group's distillation equipment and decolorization and deodorization equipment are used to deeply process fuel oil into diesel oil. Tyre diesel can be used for trucks, tractors, etc.

2. Carbon black:

Carbon black application

1).Made of spherical carbon black, carbon black briquettes for heating and burning.
2).Ground to N220, N330, N550 or N6660 for tire manufacturing industry.
3).Processed into masterbatch, sold to the plastics industry.

3. Combustible gas

1).Recycle to furnace, heat reactor, save your coal/wood/fuel oil/natural gas.
2).Store remaining exhaust gas for heating other furnaces.

3 sets of 10T waste plastic pyrolysis plant being installed

How to convert waste plastic to pyrolysis oil? There are already very mature technologies and there are national policy support. You only need to spend less investment, you can bring huge profits later, is your best choice for investment!

Prev: Will Tyre pyrolysis plant can process whole tires or need shredded them?

Next: What Is Pyrolysis Plant?

How to convert waste plastic to pyrolysis oil?

contact us