plastic to oil
Plastic to oil machine
Doing produced plastic to oil machine transforming non - recycled plastic into a valuable commodity, and creating a reliable source of alternative energy from an abundant, no - cost feedstock.

Plastic to oil ?
plastic to oil
Plastic to oil machine working process

Step -1

Put plastic material into the pyrolysis reactor by mechanical feeding machine or manual, then it is delivered into the store bin with the help of conveyor belt. Then, close the feeding door and open heating system of the machine.

Step – 2

In this step, two stages are there in the process. The primary stage: the heat energy needs to start with 100 degree Celsius and ending with 250 degree Celsius. In 100 degree Celsius, the oil gas will release and in 120 degree Celsius the liquid oil will release. The secondary stage: the heat energy needs to change from 250 degree Celsius towards 280 degree Celsius; it is the peak output rate. The oil gas will be collected into the manifold, and the oil as well as the weighty particles are accumulate and dissolved in the center of the manifold and drop into the deep oil container (oil tank). And the lighter oil gas will certainly go up to multifunctional oil condensers to liquefy into oil and keep in the tank.

Step – 3

The triditional way is cool down the plastic to oil machine after the completion of Step-1 and Step-2. Once the heat reaches about 40 degree Celsius, the carbon black will be discharged automatically.Gernerally the cooling time is 4-5 hours.Now we have updated the slagging system.The main advantages are as follows:


pyrolysis plant new slagging system
DOING 2018 new slagging system

 1.Wind transportation slagging system  can save much more time,improve the equipment operation efficiency.

 2.
Compared with previous slag removal systems, it saves floor space and reduces investment.

 3.
The collected carbon black is relatively concentrated, facilitating loading and transportation.

 4.Maintenance is simple.

After the 3 step working process ,you can finally get fuel oil,carbon black, and flammable gas.Most people wants to know the oil yield of converting plastic to oil by our pyrolysis  plant.Generally ,you can get 45-50%fuel oil ,but it's not a accurate date.The scientific explanation is that the yield of different waste plastics is different.


different plastic oil yield
Different kinds of waste plastic final oil yield


 
According to our many years of experience in the industry, we have already summed up the situation of different kinds of waste plastics. Of course, the kinds of waste plastics we have listed are also limited. Would like to know the final oil output rate of the specific waste plastic,we are always welcome for your consult.


contact us

Name:

Email*:

Tel/Whatsapp:

Country:

Inquiry: